"Pro7" Mould Cleaner 0.5l

"Pro7" Mould Cleaner 0.5l

Regular price
$14.50
Sale price
$14.50
Regular price
Sold out
Unit price
per 

Mold Cleaner FEATURES. Mold remover. Extremely strong foaming cleanser to remove mold. A1 (HACCP) * certified product that can also be used in the food industry. The unique product formula makes it easy to remove even stubborn dirt. Does not leave streaks. Not suitable for cleaning soft metal surfaces such as aluminum. APPLICATION. Suitable for use on various surfaces: tiles, ceilings, walls, windowsills, etc. RULES FOR USE. Depending on the concentration of dirt and contamination, dilute 2% -5% (1:50-1:20). When cleaning surfaces, use sufficient liquid to ensure sufficient surface moisture during cleaning. Minimum processing time - 5 minutes. Cover the surface to be cleaned with a product and leave for a few minutes, then rinse with clean water or wipe with a clean cloth. PRECAUTIONS. Store in tightly closed original container in a dry, well-ventilated place. Do not store together with flammable substances, products. Do not damage the packaging. Store at a temperature not lower than -15 ° C and not higher than + 15 ° C and away from heat and sunlight. In case of contact with eyes, rinse thoroughly with water and keep out of the reach of children. IMPORTANT: Before cleaning the mold, especially in the bathroom, keep in mind that if the mold is soaked in or even after the silicone, it will not be possible to clean it with cleaning agents. In this case, the silicone must be removed, cleaned and re-siliconized. If the mold is not deeply absorbed into the silicone and has accumulated only on the surface, it can be cleaned. Try it out: Drain the mold-damaged areas with as hot water as possible and spray them with the product, leaving the product on the surface for 1-2 hours, taking care that the product dries from time to time on the surface of the bath itself. After 1-2 hours, pour as much water as possible and spray again.